Prodotti
h6 K10 vireg tal-karbur tat-tungstenu mitħun grad
Introduzzjoni tal-Prodott
Vireg tal-karbur tas-siment jistgħu jintużaw biex isiru l-imtieħen tat-tarf, diversi drill bits, cutter speċjali tal-karozzi, cutters speċjali tal-magni, horology, cutters speċjali tal-ipproċessar, cutter tat-tħin vertikali integrali, graver u eċċ Ukoll, il-virga tal-karbur tat-tungstenu tista 'ssir f'liga iebsa puntelli, mandrini, ċentri, u għodod tal-perforazzjoni.
Karatteristiċi tal-Prodott
1. Reżistenza tajba għall-ilbies, toughness ogħla, preċiżjoni għolja, deformazzjoni aħjar u reżistenza għall-ksur
2. Tagħmir ta 'estrużjoni awtomatiku avvanzat biex jipproduċi
3. Sinterizzazzjoni tal-ġenbejn u tħin ta 'preċiżjoni biex jiżguraw li jkollhom prestazzjoni tajba
4. Kemm kondizzjonijiet vojta kif ukoll lesti disponibbli
5. Jista 'jilħaq wiċċ ta' effett mera wara tħin u illustrar preċiżi
Dettalji tal-Prodott
Daqsijiet Referenzjati
| Vireg tal-Karbur Solidu (Tul sħiħ) | |||||
| Dija nominali | D (mm) | D (mm) | Tul | Rimarki | |
| D (mm) | Un-art | h6 | mm | ||
| 0.5 | 0.7 | 0.5 | 310-330 | ||
| 0.8 | 1 | 0.8 | 310-330 | ||
| 1 | 1.2 | 1 | 310-330 | ||
| 1.5 | 1.7 | 1.5 | 310-330 | ||
| 1/16" | 1.5875 | 1.8 | 1.5875 | 12" -13" | daqs pulzier |
| 2 | 2.2 | 2 | 310-330 | ||
| 2.35 | 2.55 | 2.35 | 310-330 | ||
| 3/32" | 2.38 | 2.6 | 2.38 | 12" -13" | daqs pulzier |
| 2.5 | 2.7 | 2.5 | 310-330 | ||
| 3 | 3.2 | 3 | 310-330 | ||
| 1/8" | 3.175 | 3.4 | 3.175 | 12" -13" | daqs inchi |
| 3.5 | 3.7 | 3.5 | 310-330 | ||
| 5/32 | 3.968 | 4.2 | 3.968 | 12" -13" | daqs inchi |
| 4 | 4.2 | 4 | 310-330 | ||
| 4.5 | 4.5 | 310-330 | |||
| 3/16" | 4.7625 | 5 | 4.762 | 12" -13" | daqs pulzier |
| 5 | 5.2 | 5 | 310-330 | ||
| 5.5 | 5.7 | 5.5 | 310-330 | ||
| 6 | 6.2 | 6 | 310-330 | ||
| 1/4" | 6.35 | 6.6 | 6.35 | 12" -13" | daqs pulzier |
| 6.5 | 6.7 | 6.5 | 310-330 | ||
| 7 | 7.2 | 7 | 310-330 | ||
| 7.5 | 7.7 | 7.5 | 310-330 | ||
| 5/16" | 7.937 | 8.2 | 7.937 | 12" -13" | daqs pulzier |
| 8 | 8.2 | 8 | 310-330 | ||
| 8.5 | 8.7 | 8.5 | 310-330 | ||
| 9 | 9.2 | 9 | 310-330 | ||
| 9.5 | 9.7 | 9.5 | 310-330 | ||
| 3/8" | 9.525 | 9.7 | 9.525 | 12" -13" | daqs pulzier |
| 10 | 10.2 | 10 | 310-330 | ||
| 10.5 | 10.7 | 10.5 | 310-330 | ||
| 11 | 11.2 | 11 | 310-330 | ||
| 7/16" | 11.11 | 11.3 | 11.11 | 12" -13" | daqs pulzier |
| 11.5 | 11.7 | 11.5 | 310-330 | ||
| 12 | 12.2 | 12 | 310-330 | ||
| 12.5 | 12.7 | 12.5 | 310-330 | ||
| 1/2" | 12.7 | 12.9 | 12.7 | 12" -13" | daqs pulzier |
| 13 | 13.2 | 13 | 310-330 | ||
| 13.5 | 13.7 | 13.5 | 310-330 | ||
| 14 | 14.2 | 14 | 310-330 | ||
| 9/16" | 14.288 | 14.5 | 14.288 | 12" -13" | daqs pulzier |
| 14.5 | 14.7 | 14.5 | 310-330 | ||
| 15 | 15.2 | 15 | 310-330 | ||
| 15.5 | 15.7 | 15.5 | 310-330 | ||
| 5/8" | 15.875 | 16.1 | 15.875 | 12" -13" | daqs pulzier |
| 16 | 16.2 | 16 | 310-330 | ||
| 16.5 | 16.7 | 16.5 | 310-330 | ||
| 17 | 17.2 | 17 | 310-330 | ||
| 17.5 | 17.7 | 17.5 | 310-330 | ||
| 18 | 18.2 | 18 | 310-330 | ||
| 18.5 | 18.7 | 18.5 | 310-330 | ||
| 19 | 19.2 | 19 | 310-330 | ||
| 3/4" | 19.05 | 19.3 | 19.05 | 12" -13" | daqs pulzier |
| 19.5 | 19.7 | 19.5 | 310-330 | ||
| 20 | 20.2 | 20 | 310-330 | ||
| 20.5 | 20.7 | 20.5 | 310-330 | ||
| 21 | 21.2 | 21 | 310-330 | ||
| 21.5 | 21.7 | 21.5 | 310-330 | ||
| 22 | 22.2 | 22 | 310-330 | ||
| 22.5 | 22.7 | 22.5 | 310-330 | ||
| 23 | 23.2 | 23 | 310-330 | ||
| 23.5 | 23.7 | 23.5 | 310-330 | ||
| 24 | 24.2 | 24 | 310-330 | ||
| 24.5 | 24.7 | 24.5 | 310-330 | ||
| 25 | 25.2 | 25 | 310-330 | ||
| 1" | 25.4 | 25.7 | 25.4 | 12" -13" | daqs pulzier |
| 26 | 26.3 | 26 | 310-330 | ||
| 27 | 27.2 | 27 | 310-330 | ||
| 28 | 28.2 | 28 | 310-331 | ||
| 29 | 29.2 | 29 | 310-333 | ||
| 30 | 30.2 | 30 | 310-334 | ||
| 31 | 31.2 | 31 | 310-335 | ||
| 1-1/4" | 31.75 | 32 | 31.75 | 12" -13" | daqs pulzier |
| 32 | 32.2 | 32 | 310-336 | ||
| 33 | 33.2 | 33 | 310-337 | ||
| 34 | 34.2 | 34 | 310-338 | ||
| 35 | 35.2 | 35 | 310-339 | ||
| 36 | 36.2 | 36 | 310-340 | ||
| 37 | 37.2 | 37 | 310-341 | ||
| 38 | 38.2 | 38 | 310-342 | ||
| 1-1/2" | 38.1 | 38.4 | 38.1 | 12" -13" | daqs pulzier |
| 39 | 39.2 | 39 | 310-343 | ||
| 40 | 40.2 | 40 | 310-344 | ||
| 42 | 42.2 | 42 | 310-344 | ||
Lista tal-Gradi
| Introduzzjoni tal-Grad għall-Vireg tal-Karbur | |||||||
| Grad | Ko % | Daqs tal-qamħ WC | HRA | HV | Densità (g/cm³) | Saħħa tal-liwi (MPa) | Ebusija tal-ksur (MNm-3/2) |
| KT10F | 6 | Submicron | 92.9 | 1840 | 14.8 | 3800 | 10 |
| KT10UF | 6 | superfine | 93.8 | 2040 | 14.7 | 3200 | 9 |
| KT10NF | 6 | nanometru | 94.5 | 2180 | 14.6 | 4000 | 9 |
| KT10C | 7 | Multa | 90.7 | 1480 | 14.7 | 3800 | 12 |
| KT11F | 8 | Submicron | 92.3 | 1720 | 14.6 | 4100 | 10 |
| KT11UF | 8 | superfine | 93.5 | 1960 | 14.5 | 3000 | 9 |
| KT12F | 9 | superfine | 93.5 | 1960 | 14.4 | 4500 | 10 |
| KT12NF | 9 | nanometru | 94.2 | 2100 | 14.3 | 4800 | 9 |
| KT15D | 9 | Submicron | 91.2 | 1520 | 14.4 | 4000 | 13 |
| KT15F | 10 | Submicron | 92.0 | 1670 | 14.3 | 4000 | 11 |
| KT20F | 10 | Submicron | 91.7 | 1620 | 14.4 | 4300 | 11 |
| KT20D | 10 | Submicron | 92.0 | 1670 | 14.3 | 4500 | 11 |
| KT25F | 12 | superfine | 92.4 | 1740 | 14.1 | 5100 | 10 |
| KT25EF | 12 | superfine | 92.2 | 1700 | 14.1 | 4800 | 10 |
| KT25D | 12 | superfine | 91.5 | 1570 | 14.2 | 4200 | 13 |
| KT37NF | 15 | nanometru | 92.0 | 1670 | 13.8 | 4800 | 10 |
Ikteb il-messaġġ tiegħek hawn u ibgħatilna
